Causes and solutions for stop code [Critical Process Died] in Windows 10 and 11

In Windows 10 and 11, the error [Critical Process Died] is literally a message saying, "An important process (step) has died." The specific solution is as follows,If the computer does not start in safe mode, you will most likely need to perform a recovery and reinstall Windows.

• Check hard disk (SSD) for errors
  "CHKDSK /FC:" "SFC /SCANNOW" in a command prompt with administrator privileges
• Try booting in safe mode
  Once it starts up, uninstall recently installed apps and update drivers.
• Uninstall updates
• Recover your computer or reinstall Windows

When using Windows 10 or 11, a blue screen may suddenly appear and a stop code [Critical Process Died] may appear. This error indicates that a critical system process has stopped unexpectedly. If this error occurs, it may cause data loss or system damage, so it must be resolved immediately.

In this article, we will explain in detail the causes and solutions for the [Critical Process Died] error on Windows 10 and 11. First, it is important to understand the main reasons why this error occurs. Causes include bad sectors, faulty device drivers, virus infection, corrupted system files, etc.

Solutions include repairing bad sectors, updating device drivers, virus scanning, and repairing system files. In this article, we will walk you through each of these solutions and explain in detail which method is most suitable for you. If you encounter the [Critical Process Died] error on Windows 10 or 11, refer to this article to resolve it.

What is the stop code [Critical Process Died] in Windows 10 and 11?

When using Windows 10 or 11, a blue screen may appear and a stop code [Critical Process Died] may appear. This error indicates that a critical system process has stopped unexpectedly. This error can result in data loss and system damage. So, what exactly is this [Critical Process Died] error?

Causes of stop code [Critical Process Died]

The [Critical Process Died] error indicates that a system process has died, but why does that happen? Causes include bad sectors, faulty device drivers, virus infection, corrupted system files, etc.

First, bad sectors occur when there is physical damage to some area within the hard disk. This damage may cause system processes to stop.

Secondly, device driver failures can occur due to outdated versions of drivers or incorrectly downloaded drivers. Virus infections can also cause system processes to stop.

Finally, corrupted system files are also one of the reasons that cause [Critical Process Died] error. Problems with system files can stop important processes and cause your system to crash.

How to solve the stop code [Critical Process Died]

If you receive a "Critical Process Died" error, first try restarting your system. If the error persists, you may need to repair bad sectors, update device drivers, scan for viruses, repair system files, etc.

To repair bad sectors, you can use software that checks your hard disk and repairs any problems. Updating device drivers requires using Device Manager to download and install the latest drivers. Virus scanning requires using reliable antivirus software to scan the entire system and detect malware.

You can use the Windows Disk Check tool to repair system files. This tool automatically attempts to repair any problems with your system files.

You can also use system restore points. Windows automatically creates system restore points when important changes are made to the system. This can be used to restore the system to the state it was in before the error occurred.

You can resolve the [Critical Process Died] error by trying the above solutions in order. However, depending on the repair method, data may be lost, so it is important to back up important data.

What is the stop code [Critical Process Died]? summary of

When the [Critical Process Died] error occurs in Windows 10 or 11, system processes may stop and the system may crash. This error can be caused by bad sectors, faulty device drivers, virus infection, corrupted system files, etc. Solutions include repairing bad sectors, updating device drivers, virus scanning, and repairing system files. If you encounter an error, try these solutions in order. Don't forget to back up your data.

How to resolve when Windows 10, 11 does not start even in safe mode with stop code [Critical Process Died]

In Windows 10 and 11, a blue screen may appear and a stop code [Critical Process Died] may appear. This error indicates that a critical system process has stopped unexpectedly. However, what can I do if this error occurs and the computer does not start even in safe mode?

Unraveling the cause when safe mode does not start with the stop code [Critical Process Died]

If the [Critical Process Died] error occurs and the computer does not boot even in safe mode, possible causes include hardware failure, driver failure, system file corruption, or virus infection.

First, hardware failures may include physical damage to the hard disk or memory failure. In these cases, hardware repair or replacement is required.

Next, if it's due to a driver failure, try installing a new driver. If Windows drivers are causing the issue, you can also try using third-party drivers.

If it is due to system file corruption, you can use Windows repair tools to repair system files. You can also reinstall Windows, but you will lose all your data in this case, so you should make a backup beforehand.

Finally, if it is due to a virus infection, you should use reliable antivirus software such as Windows Defender to run a scan and remove the malware.

Solution if Safe Mode also does not start with stop code [Critical Process Died]

If the [Critical Process Died] error occurs and the computer does not start even in safe mode, the following solutions are available.

1. In case of hardware failure, repair or replacement is required. Please consult an expert.
2. If it's a driver issue, try installing the latest driver.
3. In case of system file corruption, use Windows repair tools or reinstall.
4. In case of virus infection, use reputable antivirus software to run a scan and remove the malware.

You can also select the option when Windows starts. This option allows you to repair system files or revert to a previous state during startup. This option can be accessed using Windows installation media.

If the error persists after trying the above solutions, we recommend that you consult a professional.

Summary when safe mode does not start due to stop code [Critical Process Died]

In Windows 10 and 11, a blue screen may appear and a stop code [Critical Process Died] may appear. If this error occurs and the computer does not boot even in safe mode, possible causes include hardware failure, driver failure, system file corruption, or virus infection. Solutions include hardware repair or replacement, driver installation, system file repair or reinstallation, and virus scanning. If the above methods do not resolve your issue, we recommend that you consult a professional.

How to resolve infinite loop with stop code [Critical Process Died] on Windows 10 and 11

First, force quit, etc., and then"How to resolve when Safe Mode does not start due to stop code [Critical Process Died] in Windows 10 and 11"Please try the same method.

Can the stop code [Critical Process Died] on a laptop be cured by discharging it?

When using a laptop, a blue screen may appear and a stop code "Critical Process Died" may appear. When this error occurs, it is said that completely shutting down the laptop and discharging it may solve the problem, but is it really possible to fix it by discharging it?

Reasons why "Critical Process Died" occurs on a laptop computer

[Critical Process Died] error may occur because a critical system process has stopped unexpectedly. This includes faulty drivers, corrupted system files, virus infections, etc.

However, there is no scientific basis for the claim that discharging the laptop will resolve the error. Discharging your laptop may not resolve the error. In reality, discharging is unlikely to restore normal functionality to your laptop.

How to resolve "Critical Process Died" on your laptop

If the [Critical Process Died] error occurs, discharging it is unlikely to resolve the issue, so try the following methods.

1. If it's a driver issue, try installing the latest driver.
2. In case of system file corruption, use Windows repair tools or reinstall.
3. In case of virus infection, use reputable antivirus software to run a scan and remove the malware.
4. If you suspect a hardware problem, we recommend that you consult a professional. In particular, if you suspect physical damage to the hard disk or memory failure, you need to take immediate action.

Summary of whether "Critical Process Died" can be cured by electric discharge on a laptop computer

If your laptop displays a blue screen with a stop code, Critical Process Died, there is no scientific basis for the claim that discharging the battery will resolve the error. Discharge rarely restores normal functionality to your laptop. Therefore, instead of discharging, it is necessary to try appropriate remedies if the cause is a faulty driver, corrupted system files, virus infection, etc.

If your laptop experiences a stop code "Critical Process Died" and trying things like updating drivers or repairing system files doesn't resolve the problem, it's likely a hardware issue. In this case, it is important to consult a specialist. A professional can test the hardware, identify the problem, and make any necessary repairs or replacements.

It is also important to perform regular maintenance on your laptop to prevent problems. Run regular virus scans, delete unnecessary files, clean your hardware, and update drivers as needed. This will help you avoid any problems with your laptop.

I will introduce a web page that says that the stop code [Critical Process Died] has been cured in Windows 10 and 11.

A blue screen may occur on Windows 10 or 11, and a stop code [Critical Process Died] may be displayed. This article also introduces a solution, but it may not be sufficient. However, if you can find a web page that states that this error has been fixed, it may be helpful in knowing how to resolve the issue. Therefore, in this article, I will introduce a web page that says that the stop code [Critical Process Died] has been cured.

A web page that states that [Critical Process Died] has been cured.

I will introduce a web page that says that the stop code [Critical Process Died] has been cured, but please be careful and check the information. Also, this page is in English, so if you don't understand English, please use Google Translate.

1. How to Geek

https://www.howtogeek.com/263630/how-to-fix-the-critical_process_died-error-in-windows-10/

How to Geek provides detailed instructions on how to resolve the "Critical Process Died" error on Windows 10. This article provides various solutions, including checking system files, updating drivers, and reinstalling Windows.

2. Windows Latest

https://www.windowslatest.com/2020/09/23/fix-windows-10-critical-process-died-error/

Windows Latest reports on how to resolve the [Critical Process Died] error in Windows 10. The article states that the cause is likely to be a faulty driver or memory issue, and provides workarounds for it.

3. UgetFix

https://ugetfix.com/ask/how-to-fix-critical-process-died-bsod-on-windows-10/

UgetFix introduces how to resolve the [Critical Process Died] error on Windows 10. This article includes information on updating drivers, repairing system files, reinstalling Windows, and more.

Stop Code [Critical Process Died] Frequently Asked Questions

Critical Process Died I can't do anything, what should I do?

In my experience, if a stop code [Critical Process Died] occurs and you cannot boot into safe mode, the only option is to recover your computer or perform a clean install of Windows.

Your hard disk or SSD is probably fine, so back up any necessary data and perform a recovery or clean install.

Please tell me how to solve the problem when CRITICAL PROCESS DIED occurs frequently.

If Critical Process Died occurs frequently, it means that the computer may start up. In that case, the problem may be resolved by checking the hard disk or SSD for errors, updating the driver, and uninstalling Windows updates.

Can I retrieve data using Critical Process Died? If possible, please tell me how.

Almost 100% data can be retrieved. Disassemble your computer (you may be able to open the lid by removing a few screws without disassembling it) and remove the hard disk or SSD.
Data can be retrieved by connecting the removed hard disk or SSD to another computer using a SATA-USB conversion cable.

Critical Process Died Is it okay to force quit?

No problem, please force quit.

Should I do a clean install of Windows with Critical Process Died?

As I have written many times, if Critical Process Died occurs and you cannot boot into safe mode, you should recover your computer or perform a clean install.

Summary of causes and solutions for stop code [Critical Process Died] in Windows 10 and 11

A blue screen may occur on Windows 10 or 11, and a stop code [Critical Process Died] may be displayed.

In my experience, if a Critical Process Died occurs and you are unable to boot into safe mode after trying to fix it, I highly recommend recovering your computer or doing a clean install.

No matter what you do, you'll end up having to perform a recovery or clean install.

Also, there is no scientific basis for the claim that discharging will resolve the error, so it is necessary to try appropriate remedies. Regular maintenance is also important, and we recommend virus scans, hardware cleaning, and driver updates. However, not all solutions are necessarily effective in all environments. Therefore, it is important to collect information from reliable sources and strive to obtain accurate information.